Hydrocell XL

3,500.00৳ 

Hydrocell XL is a cross-linked, semi-rigid, closed-cell polyethylene sheet material used for forming or filling expansion joints between adjacent in-situ or precast components.

Description

Hydrocell XL is a product of Fischer Limited. Conchembd is one of the trusted sellers of all kinds of Fischer Products. If you are looking for best Hydrocell XL price in Bangladesh and other Fischer products best price in Bangladesh, then conchembd is a trusted place with best price of Fischer products.

Conchembd is an authorized supplier of Fischer products. All kinds of best Fischer products in one place “conchembd”. Conchembd has online shop for all kinds of construction chemicals including all kinds of Fischer products. Please order online with free delivery or call us 01840-402299 or email us conchemmart@gmail.com. Retails and bulk orders are available.

Description of Hydrocell XL price in Bangladesh:

Hydrocell XL is a cross-linked, semi-rigid, closed-cell polyethylene sheet material used for forming or filling expansion joints between adjacent in-situ or precast components. Hydrocell XL provides excellent support backing to elastomeric sealants and is especially recommended for use in expansion joints in brickwork and in the construction of water retaining and water-excluding structures.

Uses of Hydrocell XL price in Bangladesh:

Hydrocell XL is a cross-linked, non-absorbent, semi-rigid, cellular polyethylene joint filler used for forming expansion joints in concrete, brickwork, and blockwork. The product provides excellent support to sealants subject to hydrostatic pressure and is particularly recommended for water-retaining or water-excluding structures.

  • Potable water reservoirs
  • Culverts and canals
  • Sewage tanks
  • Roadways and hard standings
  • Retaining walls
  •  Basement structures and subways
  •  Runways, taxiways, and aprons

Advantages of Hydrocell XL price in Bangladesh:

  1. Cross-linked to resisting lateral and hydrostatic pressure
  2. High-density support of sealant to prevent adhesion failure
  3. Non-absorbent closed cell structure
  4. High compression recovery
  5.  Non-extruding
  6.  Low load transfer to joint edges
  7. Non-tainting and rot proof
  8. Chemically resistant
  9. Bitumen free
  10. Natural bond breaker

Standards compliance:
DTP Specification for Highway Works, February 2016, Series 1000, Clause 1015. BS 5628, Part 3: Code of Practice for the Use of Masonry. The compressive strength of Hydrocell XL prevents the transfer of load across movement joints. Each cell is cross-linked thereby preventing breakdown under hydrostatic pressure. The closed cell formation prevents the absorption of water.

Specification clauses:
The joint filler shall be cross-linked, non-absorbent, semi-rigid, and cellular polyethylene. It shall have a recovery of 98% after 50% compression and a compressive strength of 0.15 N/mm² when tested in accordance with ASTM D3575. It shall have a water absorption of less than 0.05% by volume when tested in accordance with ASTM D3575 and be resistant to weathering and chemical attack

Application instructions
Joint sealing slots
When forming expansion joints with Hydrocell XL in in-situ concrete, joint sealing slots can be readily formed in the following manner.

Before installing, simply cut off a strip to the required depth. Pin the strip back by using 50 mm nails at approximately 100 mm intervals. Then install the filler flush with the finished surface. Prior to sealing, the top strip can then be pulled easily from the joint to provide an uncontaminated sealing slot ready for preparation and sealing.

As elastomeric sealants will not bond to Hydrocell XL the additional need for bond breaker strips is eliminated.

Estimating:

Hydrocell XL is supplied in the following sheet sizes and can
be easily cut to the required size with a Stanley knife or saw.
10 mm x 1000 mm x 2000 mm
15 mm x 1000 mm x 2000 mm
20 mm x 1000 mm x 2000 mm
25 mm x 1000 mm x 2000 mm
For details of other thicknesses, contact Fosroc

Limitations:

Hydrocell XL should not be used when the operating temperature is continuously below -70°C or above 100°C.

Storage
Hydrocell XL should be stored in original unopened packaging, in cool dry conditions, away from sunlight.

Precautions
Health and Safety:

There are no known health hazards associated with Hydrocell XL in normal use.

 

 

size chest(in.) waist(in.) hips(in.)
XS 34-36 27-29 34.5-36.5
S 36-38 29-31 36.5-38.5
M 38-40 31-33 38.5-40.5
L 40-42 33-36 40.5-43.5
XL 42-45 36-40 43.5-47.5
XXL 45-48 40-44 47.5-51.5

Reviews

There are no reviews yet.


Be the first to review “Hydrocell XL”